20
Copyright © 2016 Somfy SAS. All rights reserved.
Mounting
Easy installation using adhesive strips
• Clean the surface where the unit and the magnet will be
mounted.
• Affix the elements following the chosen installation method
(A or B).
Mounting with screws
• Press on the upper section of the
unit and magnet to unclip the front
panel.
• Place the back panel (of the unit or
magnet) into the chosen position and
the screw holes with a pencil.
• Use fixing screws (3mm diameter
and 19mm in length) and suitable
plugs (3mm diameter and 25mm in
length) to fix the opening and impact
sensor to the surface.
• Firmly secure the back section
of the opening and impact sensor
in place.
Configuration
To use the opening and impact sensor in the various settings
previously mentioned, use the following configurations.