background image

14

Copyright © 2016 Somfy SAS. All rights reserved.

Important information - safety 

General information

Read this installation guide and the safety instructions carefully 
before installing this Somfy product. All the instructions given 
must be followed closely and this guide must be stored in a 
safe place throughout the service life of your product.
These instructions describe how to install and commission this 
product.
Any installation or use outside the field of application specified 
by Somfy is forbidden.
This invalidates the warranty and discharges Somfy of all 
liability, as does any failure to comply with the instructions 
given herein.
Somfy cannot be held responsible for any changes in 
standards which come into effect a>er the publication of these 
instructions.

General safety instructions

• This product is not designed to be used by persons (including 
children) whose physical, sensory or mental capacity is 
impaired, or persons with little experience or knowledge, unless 
they are under supervision or have received instructions on 
using this product by a person responsible for their safety.
• Do not let children play with this product.
• Do not immerse the product in liquid.
• Do not drop, drill or dismantle this equipment, as this will 
invalidate the warranty.
• Do not expose this equipment to high temperatures or leave it 
in direct sunlight.

Summary of Contents for 1811482













Reviews: