20
5.9 Adjusting the length of the pelvic belt
5.9.1 Identify the require length of the belt. (Figure 5.19)
5.9.2 Push the two part of belt through buckle to make the belt longer or shorter.
(Figure 5.20)
5.9.3 Pull the two parts of belt tight. (Figure 5.21)
5.9.4 Push buckle up to the plastic clip so that the belt can not slip out of position.
Please check that there is no gap between the clip and buckle. (Figure 5.22)
SUGGESTION
●
We recommend that the belt is fitted quite tightly around the pelvis. Please
tighten until you can just get your fingers between user and seat belt. Please
check that the belt is fastened correctly as recommended. If this is not possible
please consult your supplier.
Figure 5.19
Figure 5.20
Figure 5.21
Figure 5.22