PULSAR
•
23
USER MANUAL
INDIVIDUAL COMPONENTS AND IMPULS CONVERTERS
diode is a single radio component, useful for atomic control of signals and circuit
bending.
You can modulate the velocity of a trigger output of the looper/recorder with the LFO
signal. To do this, connect the left contact of the diode (anode) to the TRIG output,
and the right contact of the diode (cathode) to the triangle LFO output. The velocity
of selected synthesis module will follow the LFO.
Try to insert the diode in different directions in different modulation and dynamic
control circuits.
capacitor is a single radio component, useful for atomic signal control and circuit
bending. There are two capacitors, 0.1 mf and 10 mf. The capacitors allow you to cut off the
constant component of the signal and form a decay of the desired length for long signals.
Try connecting the low-frequency output of the clock divider through a capacitor to
the CV input that controls the filter frequency of one of the modules. For each jump
in a rectangular signal, the capacitor will form a smoothly falling envelope, the length
of which will depend on the nominal value: 0.1 mf will give a quick decline, 10 mf will
be slow.
Try inserting a capacitor in various modulation and dynamic control circuits.
By connecting one contact of the capacitor to the ground (GND pin), and the other
to a signal, you will create a low-pass filter that cuts off the high-frequency component
of the audio signals and softens the attack of the control signals.
pulse converter — designed to convert rectangular signals into short pulses
suitable for triggering synthesis modules. Designed to work with the clock divider, but
can be used in various experiments.
To get a basic techno rhythm, connect output 2 of the clock divider to the left contact
(input) of the first converter, and connect the right contact (output) of the first con-
verter to the TRIG SD input; connect output 4 of the clock divider to the input of the
second converter, and connect the output of the second converter to the input of TRIG
BD; connect output 16 of the clock divider to the TRIG HHT input.
Summary of Contents for Pulsar 23
Page 1: ...USER MANUAL ...
