PULSAR
•
23
USER MANUAL
All SHAOS outputs are shifted relative to each other and produce different se-
quences.
If you want SHAOS to work in sync with the master clock, connect the CLK input to
the desired output of the master clock divider array.
If a signal with a frequency that is not related to the internal SHAOS clock, for exam-
ple from the LFO generator, is fed to the S/H input, the length of the pseudo-random
sequence will increase significantly, theoretically to infinity.
If the SHAOS clock is very fast, the generator will start working in the audio range and
can be used to synthesize complex waveforms. A very fast clock can be obtained using
the square wave output of the LFO module operating in HI (HIGH) mode.
Summary of Contents for Pulsar 23
Page 1: ...USER MANUAL ...
