35
LAN
In this section, the LAN settings are configured based on the IP Address and Subnet
Mask. The IP address is also used to access this Web-based management interface.
It is recommended to use the default settings if you do not have an existing
network.
◆
IP Address
— The IP address of OUTDOOR AP/CPE on the local area network.
( Default: 192.168.2.1 )
◆
Subnet Mask
— The subnet mask of OUTDOOR AP/CPE on the local area network
◆
DHCP Server
— The DHCP Server is to assign private IP address to the OUTDOOR
AP/CPE in your local area network(LAN). The default LAN IP address is 192.168.2.1,
changing IP address will also change the DHCP server’s IP subnet.
VLAN
If you want to configure the Guest and Internal networks on VLAN, the switch you
are using must support VLAN. As a prerequisite step, configure a port on the switch
for handling VLAN tagged packets as described in the IEEE802.1Q standard, and
enable this field.