SAR-600E ADSL Ethernet Router User Guide
SAR-600E ADSL Router User Guide
Page 10 of 41
Chapter 3 - Your Gateway At A Glance
The SAR-600E may have different ports and LEDs. Let’s take a look at the different options.
Depending on your model, it may have some or all of the features listed below
3.1
Ports and Buttons
Reset and Restore to Factory Defaults:
The restore to factory defaults feature will set the
ADSL Router to its factory default configuration by resetting the ADSL Router. You may need
to place the ADSL Router into its factory defaults if the configuration is changed, you loose the
ability to interface to the ADSL Router via the web interface, or following a software upgrade,.
To reset the ADSL Router, simply press the reset button for about ~ 10 seconds. The ADSL
Router will be reset to its factory defaults and after about 30 ~ 40 seconds the ADSL Router will
become operational again.
LAN (local area network) ETHERNET port:
connects to Ethernet network devices, such as a
PC, hub, switch, or routers. Some ADSL Router came with a single LAN connection and some
come with four LAN connections. Depending on the connection, you may need a cross over
cable or a straight through cable.
Power
is where you connect the power. Make sure to observe the proper power requirements.
The required power is 9 volts.
.
