•
Not Prepared
Disk has been detected, but it is not ready for
use. Use the "Prepare Disk" button to prepare the disk for use.
•
Preparing
This message will only be displayed after you have
clicked the "Prepare Disk" button. (See below for details of this
button.)
•
Prepared
Disk is ready for use
Scandisk
The status field can have any of the following values:
•
N/A
No disk is available.
•
No Scan performed
No Scandisk has been performed recently
on this drive.
•
Scandisk in progress
Scandisk operation is in progress. The
disk cannot be used while a Scandisk is in progress. If required,
use the "Start/Stop" button to terminate the Scandisk operation
and gain access to data on the disks. (To see the results of the
Scandisk operation, use the "View Disk Log" button.)
•
Scandisk completed
The last Scandisk operation has been
completed. You can use the "View Disk Log" button to view the
results.
•
Scandisk terminated
The last Scandisk operation was can-
celled by the Administrator before it was completed.
Run Scandisk
- Select the day and time you wish the Scandisk to be
done. (Select "Never" if you don't wish the scandisk to run automati-
cally.)
Page 57