Solwave 180MWHD12 User Manual Download Page 16

Page: 16 / 19

User Manual

14. Stage Cooking Programming

This mode allows the user to cook food items at manual cook mode and programming mode.

A) Three stages can be set at most under cooking mode or programming mode. After setting

the power and time for the first stage, press " Time Entry " to set the second stage. And the

same step to set the third stage.

B) When setting the second or third stage, press “Time Entry”, "STAGE 2","STAGE 3" displays.

C) Press "

1) This mode allow the users to temporarily stop the cooking cycle to inspect or
stir the food item.
2) While in Manual Cook Mode or Preset Program Cook Mode, if the door is open
and then closed, or if the " " pad is pressed, the oven will enter Pause Mode.
3) While paused,

will display the remaining cooking time.

4) Pause Mode will expire back to Idle Mode in the exact fashion as Ready Mode,
   dependent on User Option 4. Additionally,if the "         " button is pressed, the
   oven shall immediately enter Ready Mode.OR if press "          " button,
   the oven will go into working mode.

3) During this mode, "00:00" displays

If no power chosen, 100% power is default.

5) During setting process, press " " to enter Manual Cook Mode.

Press "

" to

1) This mode allows cooking of the food items.While in Manual Cook Entry Mode, pressing
the " " pad will cause to the oven to begin Manual Cook Mode.
2) During this mode, remaning cooking time displays. The fan and oven lamp will light.
3) When cooking program finish, the oven will enter End of Cook Cycle Mode.
If you press " " button under this mode,the oven will enter Pause Mode.

1) The user may manuallly enter a cook time and power level while in this mode.
2) While the oven is in the Ready Mode,pressing the "Time Entry" pad on the keyboard will
put the oven into Manual Cook Entry Mode.

5. Pause Mode

6. Manual Cook Entry Mode

7. Manual Cook Mode

,input the time you need.

the screen

4) Press "Power Level" button, "%POWER" displays. Press number buttons to select
power level you want, and the corresponding power will light.
full power level, press "1" and "0" successively.Then the screen will display"%POWER"

If you want to choose

enter Ready Mode.

" button to start cooking.

Example: In programming mode, press number buttons "3" to set two stages of

cooking. The first stage is PL7 and time is 1 minute, 25 seconds. The second stage is

PL5 and 5 minutes, 40 seconds. The steps are as follows:

1) Open the door. Press number button "1" for 5 seconds. "PROGRAM" displays.

2) Press number button "3", the screen will display "P:03". After two seconds, the screen

will display the related time ":30".

3) Press "1","2","5" to input the cooking time. "1:25" displays.

4) Press "Med-Hi 70%", "1:25 70" displays.

The first stage is finished.

5) Press "Time Entry", "STAGE 2" displays.

6) Press "5", "4", "0" button, "5:40" displays.

7) Press "Medium 50% ", "5:40 50" displays.

The second stage is finished.

8) Press "

will display the remaining cooking time.

3) During this mode, "00:00" displays

If no power chosen, 100% power is default.

5) During setting process, press " " to enter Manual Cook Mode.

Press "

" to

5. Pause Mode

6. Manual Cook Entry Mode

7. Manual Cook Mode

,input the time you need.

the screen

If you want to choose

enter Ready Mode.

" button to start cooking.

9) The total time counts down.

15. Filter Cleaning Function

A) If User Option OP:51 is selected and the setting time arrives, the oven will remind the user

to cleaning the filter.

Note:

The oven must be electrified.

B) The screen will display "CLEAN FILTER". At this time, pressing "

) Close the door, the oven will turn back to Ready Mode.

If press " " button during setting process, the oven turn to Door Open Mode.
The program that not saved will be lost. If there is program saved as memory procedure,
press the related number button, the saved program will start. If no saved program,
the buzzer will alarm when pressing number button and it will not work.

For example: set the program as memory cooking. Power level 70% and cooking

time is 1 minute and 25 seconds.

Step1: Open the door, press number button "1" for 5 seconds,"PROGRAM" displays.
Step 2: Press number button "3", the screen will display "P:03",After two seconds,

Step 3: Press number buttons "1", "2" and "5" to input the cooking time.
Step 4: Press "7 " button,"

" displays. Setting finished.

Step : Press " " to save. When use the program next time, just press "3",
the related program will start.

Note:
1. If the electricity is cut off, the saved program will not lost.
2. If the program need to reset , just repeat the aboved steps.
3. If press " " at the last step, it will turn back to Ready Mode. The setting will be no use.

1:25 70

the screen will display the

time " :30".

2) If the "X2"

in Ready Mode, followed by the starting of a Preset

or if the "X2"

button is pressed in 5 secondes of starting a Preset

start cooking with the quantity preset cooking time.

3) Press "X2", "DOUBLE" displays.

When press number

quantity preset time.

For example, number button "5" and its preset time is 1 minute. Then press "X2", then time
will change to 1:00*2=2 (2 minutes)

4) When cooking program finish, the oven will enter End of Cook Cycle Mode.

or "X3" button is pressed

Program,

or " "

Program, the oven will

Press " "

X3 , "

TRIPLE displays.

buttons,

the

screen

will

display

the

3. Double/Triple Quantity cooking

" button or opening the

door will put the oven into Ready Mode.

C) If you do not need to clean the filter, press "