manualshive.com logo in svg

Solwave 180MWHD12, User Manual, Page: 14 / 19

Share
Download
Solwave 180MWHD12 User Manual Download Page 14

User Manual

14

9. Preset Program Cook Mode

 

A)  This mode allows cooking of food items through a one pad touch operation. While in 

Ready Mode, pressing number buttons will cause the oven to run the Preset Program 

associated with that number button.

 

B)  During this mode, the screen displays the remaining cooking time. When using multi-stage 

cooking, the total remaning cooking time displays not a particular stage cooking time. 

 

C)  When the cooking program finishes, the oven will enter End of Cook Cycle Mode. If you 

press " 

1) After the time has expired in a Manual Cook Mode, or a Preset Program Cook
   Mode, the oven shall go into The End of Cook Cycle Mode.
2) During this mode, "DONE" displays.
3) If either User Option OP:11 or "OP:12" is selected, the oven shall continue to sound until
     the user acknowledges this by either opening and closing the door or pressing the "      "
    pad. If User Option OP:10 is selected, after the 3 second beep, the oven shall display
   "DONE". After the beep, "READY" will display and the oven will enter Idle  Mode without  

1) This mode allows cooking of food items through a one pad touch operation.
    While in Ready Mode,pressing 
    Preset Program associated with that number button.
2) During this mode, 

 displays the remaining cooking time. If it is multi-stage

    cooking, the total remaning cooking time displays not a particular stage cooking time.

) When cooking program finish, the oven will enter End of Cook Cycle Mode.

     If you press "         " button under this mode,the oven will enter Pause Mode.

   buttons, the preset cooking program will start automatically.

8. End of Cook Cycle Mode

9. Preset Program Cook Mode

10. On the Fly Cooking

3

the screen

1) While the oven is cooking, if User Option OP:51 is selected,press number

2) The screen displays the remaining cooking time.
3) When cooking program finish, the oven will enter End of Cook Cycle Mode.

15

   any operation for a period of time.

number buttons will cause the oven to run the 

 

" button under this mode, the oven will enter Pause Mode.

10. On The Fly Cooking

 

A)  To change programs while the oven is running, select User Option OP:51, and then press 

the number button that represents the preset program of your choice. The preset cooking 

program will start automatically. 

 

B)  The screen displays the remaining cooking time.

 

C)  When the cooking program finishes, the oven will enter End of Cook Cycle Mode.

11. Time Defrost Function

 

A)  In Ready Mode, press "DEFROST" button. The screen will display "00.00".

 

B)  Press number buttons to input defrosting time. The maximum time is 99 minutes and  

99 seconds.

 

C) Press " 

1) This mode allow the users to temporarily stop the cooking cycle to inspect or
    stir the food item.
2) While in Manual Cook Mode or Preset Program Cook Mode, if the door is open
    and then closed, or if the "        " pad is pressed, the oven will enter Pause Mode.
3) While paused, 

 will display the remaining cooking time.

4) Pause Mode will expire back to Idle Mode in the exact fashion as Ready Mode,
   dependent on User Option 4. Additionally,if the "         " button is pressed, the
   oven shall immediately enter Ready Mode.OR if press "          " button,
   the oven will go into working mode.

3) During this mode, "00:00" displays

    

  If no power chosen, 100% power is default.

5)  During setting process, press "          " to enter Manual Cook Mode.

       Press "  

   " to 

1) This mode allows cooking of the food items.While in Manual Cook Entry Mode, pressing
    the "           " pad will cause to the oven to begin Manual Cook Mode.
2) During this mode, remaning cooking time displays. The fan and oven lamp will light.
3) When cooking program finish, the oven will enter End of Cook Cycle Mode.
     If you press "         " button under this mode,the oven will enter Pause Mode.

1) The user may manuallly enter a cook time and power level while in this mode.
2) While the oven is in the Ready Mode,pressing the "Time Entry" pad on the keyboard will
   put the oven into Manual Cook Entry Mode.

5. Pause Mode

6. Manual Cook Entry Mode

7. Manual Cook Mode

,input the time you need.

the screen

14

 4) Press "Power Level" button, "%POWER" displays. Press number buttons to select 
 power level you want, and the corresponding power will light. 
 full power level, press "1" and "0" successively.Then the screen will display"%POWER" 

If you want to choose

.

enter Ready Mode.

" to start defrosting. The default power is power level 20%.

 

D)  The remaining cooking time will be displayed. When the cooking program finishes, the 

oven will enter End of Cook Cycle Mode. If you press " 

1) After the time has expired in a Manual Cook Mode, or a Preset Program Cook
   Mode, the oven shall go into The End of Cook Cycle Mode.
2) During this mode, "DONE" displays.
3) If either User Option OP:11 or "OP:12" is selected, the oven shall continue to sound until
     the user acknowledges this by either opening and closing the door or pressing the "      "
    pad. If User Option OP:10 is selected, after the 3 second beep, the oven shall display
   "DONE". After the beep, "READY" will display and the oven will enter Idle  Mode without  

1) This mode allows cooking of food items through a one pad touch operation.
    While in Ready Mode,pressing 
    Preset Program associated with that number button.
2) During this mode, 

 displays the remaining cooking time. If it is multi-stage

    cooking, the total remaning cooking time displays not a particular stage cooking time.

) When cooking program finish, the oven will enter End of Cook Cycle Mode.

     If you press "         " button under this mode,the oven will enter Pause Mode.

   buttons, the preset cooking program will start automatically.

8. End of Cook Cycle Mode

9. Preset Program Cook Mode

10. On the Fly Cooking

3

the screen

1) While the oven is cooking, if User Option OP:51 is selected,press number

2) The screen displays the remaining cooking time.
3) When cooking program finish, the oven will enter End of Cook Cycle Mode.

15

   any operation for a period of time.

number buttons will cause the oven to run the 

 

" button under this mode, the 

oven will enter Pause Mode. 

12. Programming Mode

This mode allows the user to assign cook times and power levels to the once touch button.

 

A)    Open the door and press "1" pad for 5 seconds, the buzzer will sound once and enter to 

Programming Mode.

 

B) "PROGRAM" displays.

 

C)  Setting Program: Press number button to set the program. 2 seconds later, the screen will 

display the time associated with that number button.

 

D)  Press "POWER LEVEL" button, "%POWER" displays. Press number buttons to select power 

level you want and the existing power setting will display. You can then enter a new power 

setting. If you want to choose full power level, press "1" and "0" successively. The the 

screen will display "%POWER". If no power is chosen, 100% power is default.

Note:

  Set the time first, then choose the power.

 

Summary of Contents for 180MWHD12




















Reviews:

No comments