background image

User Manual

1.  "_ _  _ _" displays when the oven is connected to power for the first time. Press red "STOP/RESET" button to enter Idle Mode. 

Note: While in Idle Mode, no buttons can be pressed.

1.  The oven will enter Idle Mode after a number of seconds have expired in Ready Mode or Pause Mode without a key being pressed or the door 

being opened & closed. The number of seconds is determined by the Keyboard Timeout Window, set by User Option 4.

2.  During Idle Mode the display is blank and there will be no oven activity.
3.  Opening and then closing the oven door will cause the oven to exit Idle Mode and enter Ready Mode.

1.  Opening and then closing the oven door while in Idle Mode will put the oven into Ready Mode.
2.  During Ready Mode, "READY" displays.
3.  From the Ready Mode, the oven can go into almost all of the other modes.
4.  The fan and the lamp remain on for 60 seconds after last use. This is a cooldown feature of the microwave.

1.  While the oven door is open, the oven will enter Door Open Mode.
2.  During this mode, the display is blank. If the door is opened during cooking, "DOOR" and "OPEN" will display in turn.
3.  When the door is closed, if User Option OP:60 is selected and the oven was running a manual or preset cook cycle, the oven shall enter Pause 

Mode. In all other cases, the oven shall be put into Door Open Mode with User Option OP:61 set, any information about a running Manual or 
Preset Program will be cleared.

1.  While in Manual Cook Mode or Preset Program Cook Mode, the oven will enter Pause Mode if the door is opened & closed or if the red "STOP/

RESET" button is pressed.

2.  While in Pause Mode, the oven will display the remaining cooking time.
3.  Only the fan and lamp will be on during Pause Mode.
4.  Pause Mode will expire back to Idle Mode in the exact fashion as Ready Mode, dependent on User Option 4.
5.  If the red "STOP/RESET" button is pressed, the oven will enter Ready Mode.
6.  If the green "START/CONFIRM" button is pressed, the oven will go into Working Mode.

1.  While the oven is in Ready Mode, press the "TIME ENTRY" button to enter Manual Cook Entry Mode.
2.  While in Manual Cook Entry Mode, the oven will display "00:00".
3.  Press the "HOLD 0%", "DEFROST 20%", "MEDIUM 50%", or "MED-HI 70%" button to select power level and it will be displayed on the LED.
4.  If the same button is pressed twice, the power will change to "PL10". If no power is chosen, "PL10" is default.
5.  Only the fan and lamp will be on during Manual Cook Entry Mode.
6.  If the red "STOP/RESET" button is pressed, the oven the oven will enter Ready Mode.
7.  If the green "START/CONFIRM" button is pressed, the oven will go into Manual Cook Mode.

1.  Press the green "START/CONFIRM" button to enter Manual Cook Mode.
2.  During this mode, the remaining cooking time is displayed and the fan and oven lamp will be on.
3.  When cooking program finishes, the oven will enter End of Cook Cycle Mode.
4.  If the red "STOP/RESET" button is pressed, the oven will enter Pause Mode.

1.  After the time has expired in Manual Cook Mode or a Preset Program Cook Mode, the oven will enter the End of Cook Cycle Mode.
2.  During this mode "DONE" is displayed.
3.  If either User Option "OP:11" or "OP:12" is selected, the oven shall continue to sound until the user acknowledges this by either opening and 

then closing the door or pressing the red "STOP/RESET" button. If User Option "OP:10" is selected, the oven will enter Idle Mode after the 3 
second beep.

Power Up

Idle Mode

Ready Mode

Door Open Mode

Pause Mode

Manual Cook Entry Mode

Manual Cook Mode

End of Cook Cycle Mode

Summary of Contents for 180MW112T








Reviews: