FRONT DISCHARGE
1 . Pull metal plate up to the closed position
and latch . This will direct food to the
bottom of the toaster .
2 . Pick up the longer of the two chutes .
3 . Slide the flanged end of the chute up
underneath the toaster .
4 . Rest the flanged end of the chute onto
the interior ledge .
REAR DISCHARGE
1 . Push the metal plate down to the open
position . This will direct food to the back
of the toaster .
2 . Loosen the two rear screws .
3 . Pick up the smaller of the two chutes .
4 . Slide the two keyholes on the chute behind
the loosened screws . If the chute does not
fit all the way down, loosen the screws more .
5 . Tighten the screws to secure the chute
to the toaster .
The optional stacking kit attachment can be used
to mount one toaster on top of another .
1 . To mount, set up both toasters for front discharge .
2 . Remove the two rear top cover screws from
the bottom toaster .
3 . Place the stacking bracket onto the top cover
of the toaster .
4 . Replace the two top cover screws,
securing the stacking bracket in place .
5 . Remove the discharge chute from the toaster
to be placed on top .
6 . Place the toaster onto the bracket, ensuring
the leveling feet locate into the holes in the
stacking bracket .
4.
As detailed in the diagrams below, the unit can either be assembled with front or rear discharge
depending on installation position and preference.
DISCHARGE ASSEMBLY
STACKING KIT
#184STK10 - 10" WIDE
#184STK145 - 14½" WIDE
