33
6 User customized application software for SX-DT-900
With the support of MS3 SDK, The terminal supports user customized application software development.
User customized application software is developed with the support of the terminal system API. For
more detail about user customized application software development please refer to the MS3 SDK help
files.
6-1 Auto Run
When this option is enabled the terminal would automatically runs the user customized application
software after boots. When user keep pressing the right soft key during system booting stage, the
system password is required before entering the system state. Entering the system state is only allowed
after the correct password is provided. Pressing the return key could lead to the user customized
application software state.
Note: It only works after successfully downloaded the user customized application software.
6-2 Execute
User could execute the user customized application software by entering the “Execute” menu. Please be
sure the user customized application software is properly downloaded to the terminal before execution.
6-3 Download
Enter into this menu to download application by MS3 SDK;
Step 1: Power on the terminal, enter into the menu
C
Application->Download;
Step 2: Make sure of connecting the PC and the terminal well with USB cable;
Step3. Clicking on the button
in the toolbar of MS3 SDK to perform download BIN file or ENP file to
the terminal;
Step4. After downloaded successfully, the terminal will respond with 2 short beeps.
