![Solux SX-DT-900 User Manual Download Page 34](http://html1.mh-extra.com/html/solux/sx-dt-900/sx-dt-900_user-manual_1317111034.webp)
28
Step 5: Press the navigational key to select the target WLAN, and press the Scan/Select Key to connect
the WLAN. If connect a password-protected WLAN, you should input passphrase.
Step 6: The terminal use the icon “
A
” to indicate which WLAN has been connected. Press Scan/Select
Key to disconnect the WLAN. The screen shows as follow:
Step 7: Press Right-Soft Key to display the Host Lists Menu. In Host Lists Menu, press the navigational
key to select the target host IP. The screen shows as follow:
Press More to add/delete the hostIP
Press Set to set the socket.
Step 8: Press Scan/Select Key to bond with the target host. “ ” indicate the connecting process.
If the terminal connects the host success, it will use “ ” icon to indicate the link state, and use the icon
“√” to indicate the target communicating host. If it has been set up multiple communication channels for
bonding with the host(Up to 8 channels), press the navigational key to move the cursor, then press the
Scan/Select key to select the target communicating host. The screen will show information as follow:
Notice:
1. Make sure the target host has been set up as a server and open the TCP/IP service, or it cannot
set up the communication channel with host successfully.
2. If the target host address is a domain name, ensure the DNS setting of the terminal is open; If the
target host address is an IP address, ensure that the DNS setting of the terminal is closed.
5-3-2-2 Access Point Mode
1)
The terminal is used as a server and the other devices are used as clients in the same WLAN. The
other devices initiate a connection to the server.
2)
The terminal can set up a WLAN and communicate with other devices that connect with the
terminal.
3)
The client initiates a connection to the server and it only supports one connection at a time.