• Remove the dummy from the input
port on the first LED fixture. Note: Keep
the dummy in a safe place! The dummy
is necessary to operate the LED fixture
in standalone mode.
• Use the black controller cable (item is
supplied with controller) to connect
the controller input port on the first
LED fixture.
• Remove the dummy from the input
port on the second LED fixture.
• Use a grey 6PC6 modular jack
interconnect cable with integrated
ferrite cores to connect the output
port of the first LED fixture to the
input port of the second LED fixture.
The indicator light will blink when the
connection is unsuccessful.
• Repeat these steps to connect up to
100 LED fixtures.
MOUNTING THE POWER SUPPLY
ENCLOSURE
1.
Hang 2 the 4# ropes into the holes on both sides of the power supply.
2.
Fix the rope to the location where it needs to be installed.
3.
The input power cord of the LED fixture connects the power supply, which can
be used.
1
2
3
CONNECTING UP TO 100 LED FIXTURES
EN