Manual FRAME-EVO-P10 / P10-US
Version 1.6
02.09.2019
Page
16
of
39
Step 3:
Place the recommended number of
Ø6 Schnorr Washers (2)
over each
corresponding hole
.
Secure the recommended number of
M6x20 ISO 7380 screws (1)
into
each hole with 4 Nm torque.
Ensure each screw runs through the plate and catches into the
corresponding M6 hole in the projector surface.
Please make sure to use only the
correspondent screw holes when installing a projector!
Do not forget to use the Ø6 Schnorr Washers (2) as they are preventing the screws to loose
themselves!
In case you removed the upper ring during Step 1 please now refer to chapter
7. Reinstalling the Upper Ring
and attach the upper ring back to the base.
Step 4
: The lens can be attached back to the projector.
Torque: 4±0.5 Nm
1
2
