MS-HD72-12UE USER GUIDE
05
|
www.m4sol.com
Quick Start
1) Please check connections are correct before starting.
2) Connect the power adapter to the power connector on the rear panel of the camera. The power
indicator on the front panel of the camera turns on.
3) After the camera is powered on, it starts to initialize, upper right turns to the limit position, and
then the horizontal and vertical turn to the middle position. When the motor stops running, it means
that the initialization is completed. (Note: If preset 0 is saved, the PTZ will turn to preset 0).
Network Cable (Not Supplied)
USB Cable (Supplied)
RS232 Cable (Not Supplied)
3.5mm Audio Cable (Not Supplied)
DC 12V IN
Power Adapter (Supplied)
Power Cable (Supplied)
PC, Router or Switch,
TV, VCR with audio input
interface, Speaker
Microphone, etc.
NET
HDMI
RS232
USB3.0 LINE IN RS485 DC 12V
RS485 Cable (Not Supplied)
HDMI Cable (Not Supplied)
