Solutions Radio Webbox2, Manual

Page: 20 / 39

subscriptions include a ‘wireless modem’. In such cases, a
router has always been built in.
When configuring the modem/router, it is important to be aware of the
transmission channel being used. We recommend that you select
automatic channel choice for this. In order to secure the connection you
will moreover need to configure the so-called WPA or WEP code. See the
manual (further down) for more information about this subject.
Internet subscriptions change constantly. Ask your preferred network
provider about these.
6.3 Connect the Webbox2

First of all take the Ethernet cable and connect it to the Webbox2 and
your Internet provider's modem, even if you plan to use the Webbox2
wirelessly.

Insert the round mains adapter plug into the back of the Webbox2
entrance and then plug the adapter itself into the electric socket.

If you want to use the remote control: Open the lid at the back of the
remote control and insert the batteries. Make sure the batteries follow
the positive and negative poles indicated.

See the instructions further down for connecting your wireless network
adapter.
Tip: If you connect the Webbox2 audio output (2x RCA plug) to your
stereo, you can either switch off the speaker temporarilyby turning
the volume down to 0 using the volume/pause knob, or by default
in 'Pause Menu>Device Configuration>Advanced Menu>startup
volume. Another solution for this is to put a loose plug into the
headset socket of your Webbox2. The internal loudspeaker will
then be turned off automatically.
17 © March 2013 Webbox2