08
Operational Instructions
Fig.6
! NOTE: The unit can be operated by supplied
remote control only. For the unit to operate,
the manual ON/OFF switch, located on the
leftside of the switch panel must be switched
to the “I” position.
Behind the screen a red light will
illuminate when the fire is plugged
in, the wall socket switch is on and
the manual on/off switch is on. The
red light will remain illuminated for
10 seconds to show there is power
to your fire.
Remote Contol Buttons and Display
! NOTE: Before attempting any operation with the remote, press and slide the battery door (on the
back of remote) open and insert two AAA batteries, checking that the + and - ends of the battery
match inside the battery compartment, close the battery door.
