SOLTRON M-40 ND Turbo Plus, Operating Instructions Manual

Page: 43 / 104

42
Gener
al safety inf
orm
ation
Please read and observe ...
• The sunbed may never be used when a filter panel is
missing or damaged, or the timer is defective!
• The time between two tanning sessions must be at least
48 hours! Do not take an additional sunbath on the
same day.
• Increasing tanning also requires an extension of the
exposure time (= radiation time) or after a certain degree
of tanning has been achieved, a further intensification is
not possible. However, the radiation time may not be
extended as desired within the scope of the permissible
radiation doses! Therefore, only a certain degree of final
tanning dependent on the skin type can be achieved
without endangering your health.
Recommended tanning times
See the table on Page 43.
Manufacturer's guarantee
Soltron accepts liability for any tanning system defects that arise in
accordance with the following regulations on behalf of customers who
have purchased an Soltron tanning system for private or commercial
utilisation from one of Soltron's sales partners; consumable parts such as
UV-high pressure lamps (burner), UV-low pressure lamps (tubes) and
starters as well as the acrylic-glass tanning bed itself are not covered by
the warranty.
The warranty stipulates that Soltron will eliminate any defects within a
time period predetermined by Soltron by repairing or exchanging the
defective part.
Claims made in accordance with this warranty can be lodged with Soltron
or the Soltron sales partner from whom the product was purchased on
presentation of the warranty card or invoice; this warranty is valid for a
period of 24 months from the date of purchase.
This does not affect the rights of the customer under the existing
guarantee with regard to any claims that the customer might have in
accordance with the contract of purchase.