This product is available to be connected with Uninterrupted-Power Cable (UPC) for using the product as a surveillance
camera when the vehicle engine is stopped. However, when you connect UPC, you are highly recommended to use our
authentic UPC which has battery protection circuit in order to prevent the vehicle battery from discharging.
1. Open fuse box inside of the vehicle and, by using electric testing device, find the fuse
which the power is supplied even while the key-off status of the vehicle. (For example,
emergency flasher lights, interior lights and door lights etc.)
2. Pull out the fuse and connect one leg of the fuse with "+" end (red color) of UPC and
insert back into original position.
screw attached to the vehicle, you must to screw one on the vehicle.
3. Connect "-" end (black color) of UPC to the any metal part of the vehicle. If there is no
* Caution: UPC can be connected only when the voltage of vehicle power is 12v.
Check vehicle voltage first by using such as electric testing device.
* Note: Power is not coming in case you connect to plasitc part like dash board other
than metal part
4. Make sure the product is working properly after the vehicle engine is started and then
arrange and hide the cable connected to the product
(Recommended number of formatting: More than once a week)
* Note: When UPC is connected, please manage SD memory card more thoroughly.
How to connect Power
(when using Uninterrupted-Power Cable)
Summary of Contents for ITB-100HD
Page 1: ...Installation Guide ...
