21
Step 12
Connection of blades and drive batten
Before starting to screw
the blades into the drive
batten, the rotating lever
must be placed in a vertical
position.
1 – rotating lever
All of L screws and washers
are already screwed into
the drive batten to keep
the inox profile within it
fixed.
Be careful to unscrew only
the screw for the blade
you're going to connect to
the batten.
Insert the washer M
between the blade cover
and the drive batten and
fasten it with L screw.
Continue with connection
of remaining blades by
fastening L screws by hand,
NOT by electrical screw
driver.
Adjustment of closing of
the blades :
1.
When you fix screws
make a “self-test” on
Teleco driver .
2. On the side where the
blades are still open,
unscrew the blades. Move
the inox profile 1mm from
the center toward the
corner of the pergola,
where the blades are not
fully closed .
3. Fasten the blades with
L screws and
Make self-test.
4. For security reason we
suggest to block alu bar
and inox plate together
with M6 screw and nuts .
M
L
1
M
Inox plate
Summary of Contents for Pergola Agava SL 160/28
