14
FULL-AUTOMATIC PROGRAMMING
This function is used to cook after a certain period of time with a certain duration, The food to
be cooked is put into the oven The oven is adjusted to the desired cooking function. The oven
temperature is adjusted to the desired degree depending on the food to be cooked.
1. Press “ ” button until you see “ Dur “ on the timer screen. Use “ + ” “ - “ button to adjust
cooking period for the food you wish to cook. Press “ ” button to confirm, the day’s time will
appear on the screen and the symbols “ A “ will begin to continuously light on the screen.
2. Keep pressing on “ ” button until you see “End” on the timer screen. When you see “End” on
the timer screen, Use “ + ” “ - ” button to adjust finishing time, Press “ ” button to confirm, the
day’s time will appear on the screen and the symbol “A” will begin to continuously light on the
screen. The symbol “ ” disappears until the time cooking starts.
You can set a time which can be up 23.59 hours after the time obtained by adding the cooking period
to the day’s time.
The oven will start operating at the time calculated by deducting the cooking period from the set
finishing time, and will stop at the set finishing time. The timer will give an audible warning and the
symbol “A” will begin to flash. After bringing the cooking function and oven temperature knob
to “0” position. Pressing any button less than 3 seconds, it will stop the audible warning.
Pressing “ ” for more than 3 seconds set the oven to Manual mode again to use the oven.
NOTE:
Once setting full-automatic mode, the time can not be changed.
Changing time means canceling the automatic program and enter into corresponding mode.
If you need to reset automatic mode, need to stop setting the current mode to set the automatic
mode according to the above steps again.
SPECIFICATION
1. When setting the date of each function, long press on “ + ”or “ - ” for more than 3 seconds, the
date will progressively and rapidly increase or decrease.
2. When setting each of the time function, if there is no operation for 5 minutes then it will return to
manual mode.
3. When setting each of the time functions, pressing “ ” and “ + ” for more than 3 seconds, a
beep sounds. It will cancel the current time function setting and enter standby mode.
4. We suggest that you run the oven elements for 15 minutes at 200 degrees to burn off any residue
from the surfaces.
OPERATION INSTRUCTIONS
When
the
oven
is
first
connected
to
the
electrical
supply
,
wait
for
the
display
automatically
show
"
12.30 ",
a
beep
sound
once
and
the
"
12 " " . "
flash
.
Ensure
the
correct
time
of
the
day
is
set
before
using
the
oven
.
please
note
:
that
is
24
hour
clock
,
for
example
2
PM
shown
as
14.00.
To set the correct time of day
1>
Press
"
+ " " - "
button to adjust the hour setting
.
2>
Press
"
"
to confirm the hour setting
.
3>
Press
"
+ " " - "
button to adjust the minute setting
.
4>
Press
"
"
to confirm the minute setting and
the timer will be in standby mode.
If the display does not flash, adjust the time of day by pressing the
" + " and
" - " buttons at
the same time for more than 3 seconds.
Oven On and Off
If the timer is in standby mode
，
press
"
"
for more than 3 seconds, the timer will enter manual
mode and the symbol
Manual mode
:
In manual mode, only the day's time and the symbol "
" lights up. The cooking duration has to
be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on accidentally, after 5 hours no any button
pressed, the timer will flash once a second to warn you the oven will enter standby mode. After a
total of 10 hours, the timer will enter standby mode.
When the timer is flashing in manual mode, press any
button
to reset the timer if you intend to
" and " + " together for more than 3 seconds to enter standby
continue using the oven. Or press "
mode
if oven will not be used.
"
"
will light up continuously
.
Note:
Time function setting
1> Set the desired cooking function and the temperature degree.
2> Set the time function, then the oven will on.
If you set Dur or End , after cooking, the oven will automatically turn off.
If you set manual or minute minder, after cooking, bring the cooking function and oven temperature
knob to "
0
" position. Press
" "
and " + " buttons for more than 3 seconds to return to standby mode.
In manual mode, pressing " " can enter the time function setting, the sequence of the function
setting is Mamual mode - Minute minder-Dur-End-Manual mode. Then selected cooking function
and adjust the cook temperature if required.
7
Operation Instructions (Continued)