Industry Canada Compliance
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme aux RSSs exempts de licence d’Industrie Canada.
Le fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d’interférences; et
(2) Cet appareil doit accepter toute interférence, y compris les interférences
pouvant entraîner un fonctionnement indésirable de l’appareil.
BEFORE YOU USE SOLOS
3
When using Solos always ensure that you keep your eyes focussed on the road
and your surroundings. Solos is designed as to provide “information snacking”,
that is a quick glance for information and you should not spend lengthy periods
looking at the display while in motion. Ensure that you position the display such
that it does not obscure your vision.
Solos should not be used for direct observation of the sun or other bright light
sources. Solos should not be used while driving, and should not be used if your
field of view is affected or if you cannot see clearly. Solos is not intended to be
used for impact protection in sports or industrial uses, although the lenses do
meet relevant impact resistance safety tests.