manualshive.com logo in svg

Solomend HD PVR 800, User Manual

Share
Download
Solomend HD PVR 800 User Manual Download Page 30

1 It will show a warning message to 
inquiry you “The operation will load 

 

29 

default and erase all the channels that user 
added, continue?”. 
2 If you select “Yes” option, the revised 
parameters of the receiver will reset to 
default value. Please carefully to using 
this function. 
3 In step 1 and step 2 , select “No” or press [Exit] key can draw back from 
this item and without saving. 
 

6.3 Upgarde By RS232 

1 

We offer the functions for users to connect 

one receiver(Master) to the other receivers 
(Slave) via serial interface.

 

2 

Connect master receiver to slave receiver 

via serial interface. Enter “Upgrade By 
RS232” menu receiver and press [Volume 
Up/Volume in master Down] keys to switch upgrade mode. Upgrade modes 
include: all code / main code /radio back / default db / user db

 

3 

Turn on slave receiver and it needn’t oper

4 

Move highlight to “Start” on master reciver 

5 

Press [Exit] key to save the parameters and dra

 

6.4 Common Interface 

1 

Press OK Key when highlight on 

“Common Interface”    will enter the CAM 
card information Menu select like below: 

2 

Press [Up/Down] Key to select slot 1 

Press OK key again to enter this card 
information menu like below: 

 
 
 
 
 
 

3 

In the CAM card information menu, you can select each item by pressing 

[Up/Down] Key and press OK to enter. This information menu format and string is 
according to CI card itself. So, different card may be has deferent menu of it. 

4 

Enter Change CA PIN can change the pin code of the CA card in this CAM card. 

 

6.5 Upgrade by USB

 

ate any setting.

 

  and press [OK] key to start upgrade. 

w Back. 

Summary of Contents for HD PVR 800




































Reviews:

No comments

Brands by name

Popular brands

Load more brands