22
Switching the satellite can move the dish to the
right place.
6
Limit Setup:
1
When you set “limit setup” to “West Limit/ East
Limit”, you can move the highlight to “Limit
Setup” line and move the dish to west or east by
pressing [Left/Right] key manually.
2
When you are moving to the target place,
press [OK] key to save the point.
4.4 Single Satellite Search
When you enter to “Single Search” menu, there will
display the screen like below:
!
Notice
You can only do network search when you select “Preset Scan”.
5
In “Scan Mode” item, you can select “Auto Scan” to blind scan or select “Preset
Scan” to scan all preset TPs.
6
Moving the highlight to “Search” item and press[OK] key to start scanning. Next
screen will display the process and show the current scanning channel.
7
In the “Single Search” menu, press [Exit] key
to draw back from the scanning and meanwhile
saving the current value.
4.5 Multi Satellite Search
When you enter to “Multi Search” menu, there
will display the screen like below:
