ENGLISH
1
Original instructions
Read this instruction manual carefully before first
operation and strictly observe the safety
regulations!
Changes to the scope of supply in form, technology
and equipment are reserved. No claims can be
derived from any information and figures in these
original instructions.
The original packaging and, at the end of its
service life, the sprayer must be properly disposed
of according to the local environmental regulations.
1
EC declaration of conformity
SOLO Kleinmotoren GmbH, Stuttgarter Straße 41,
71069 Sindelfingen, GERMANY declares that the
Foam sprayer
, types
309 FA
and
309 FB
– from
date of manufacture 07/2016 and following –
comply with the directive 2006/42/EC of the
European Parliament and of the Council of 17 May
2006 on machinery. Sindelfingen, 01 July 2018
Wolfgang Emmerich, SOLO Kleinmotoren GmbH,
Stuttgarter Straße 41, D-71069 Sindelfingen
(managing director and documentation officer)
2 Wear parts
The following wear parts are not subject to the
manufacturer's guarantee:
* All rubber parts that come into contact with
spraying liquid, * nozzles, * foam felt, * seals,
3 Warranty
Please observe that specific warranty conditions
are valid in some countries. In doubt, ask your
vendor.
No guarantee can be granted for any damage
caused by:
x
Non-observation of the original instructions.
x
Omission of necessary maintenance and
cleaning work.
x
Wear and tear from regular use
x
Use of unapproved working tools.
x
Use of force, improper treatment, abuse or
accident.
x
Manipulations by non-qualified persons or from
improper repair attempts.
x
Unauthorized modifications to the device.
x
Use of unsuitable spare parts or non-genuine
spare parts.
x
Use of unapproved chemicals or dilutions.
x
Damage caused by use in the rental business.
Any warranty work must be performed by one of
our authorised specialist vendors. Cleaning, care
and standard adjustments are not accepted as
warranty services.
For Australia only: Supplementary warranty notes
specifically for Australia
To make a claim, contact Clayton Engineering, 26
French Ave, Brendale, Q, 4500 on phone 1300 798
022 or email [email protected].
You will be asked to provide proof of purchase and
then will be instructed on the procedure for
repairing or replacement of the product under
warranty. All costs incurred for repair or replace,
and additional claims can be discussed at this
stage.
This warranty is provided in addition to other rights
and remedies you have under law: Our goods
come with guarantees that cannot be excluded
under the Australian Consumer Law. You are
entitled to a replacement or refund for a major
failure and for compensation for any other
reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
4 Symbols
Read the original instructions thoroughly.
DANGER! Non-observation of the original
instructions may potentially cause fatal
injury.
Wear the prescribed protective clothing.
Wear protective gloves.
Wear facial protection (e.g. goggles).
Wear breathing protection.
Minimum distance from other
persons: 15 m [approx. 16 yards]
