Assembly ; Accessories
ENGLISH
6
3. Assembly
Completely assembly the leaf blower before its first use:
3.1 Installation
of pleated elbow tube
Remove screws A and B.
Push pleated elbow tube (16) into the opening of the blower
housing (20) until resistance is felt and re-tighten screws A
and B to hold tube in place.
Note
: Ensure the pleated elbow tube can be easily swiveled
after fitting it to the blower housing.
3.2 Install
multi-function handle and blower tube
Push multi-function handle onto blower tube and fix
with 2 screws in the required, comfortable position.
The adjustment scope is approx. 50mm depending
on the arm length of the operator.
Push blower tube into pleated elbow tube (16) and
secure with plastic clamp (C).
Note
: With the multi-function handle the blower tube
can now be twisted and swiveled in the pleated
blower elbow. Ensure that no cables are
disconnected when testing this feature.
• Insert extension tube 2 in blower tube 1 and secure
with twist lock
• Push curved nozzle tube on extension tube and
also secure with twist lock
4. Accessories
Conversion Kit from Blower to Mist Blower
SOLO Part no.:
49 00 567
Fig. 2
Fig. 3
