4
www.
solo
-tester.com
Using
Solo Access Poles
Figure 1
• Solo poles should always be held vertically when
raising or lowering. Ensure that all extension poles
and test tool buttons are locked into position before
extension and use. (Fig.1)
• When using Solo 111 extension poles in conjunction
with Solo 110 telescopic pole, the telescopic pole
should be at the shortest length, i.e. not extended,
before attaching or removing the Solo 111 extension
pole(s) or tool.
• No more than 3 x Solo 111 extension poles should
be used at the same time (see General
Recommendations for height & angle advice).
• When lowering, always hold in the vertical. Lower
telescopic sections first, before removing Solo 111
extensions.
• When lowering telescopic poles, rest the base of the
pole on the floor and depress the locking button,
while lowering the upper sections with the other
hand.
General Recommendations
The maximum working height using Solo 110 & Solo 111
poles is 4.5 metres for Solo and Testifire.This is achieved
using 1 x Solo 110 telescopic pole and a maximum of 3
x Solo 111 extension poles. It is recommended to stand
directly under the detector (pole vertical).
If vertical working is not possible, do not exceed 3.75m
reach and stand no more than 1 metre away from a point
directly beneath the detector. (Fig. 2)
Figure 2
Solo & Testifire
1 x Solo 110
3 x Solo 111
Max
‘Click’
Solo & Testifire
1 x Solo 110 +
3 x Solo 111
Max
4m Max.
4.5m
1m Max
