Solmeta Pro2-EOS, User Manual

Page: 15 / 28

Logging the route traveled
R
11
The receiver can be used as a data logger, which records the GPS position at regular intervals in its
internal memory.
The log function is default. As long as the receiver’s GPS signal has been acquired, the daily logs are
automatically recorded in the log file, even if the receiver is not connected to the camera.
Interval time setting
Location information is recorded at regular intervals along the route traveled with the receiver. Daily
logs are saved in the flash memory. The interval time can be set via the custom settings as described
below:
1) Turn on the receiver and press the button to access the custom settings. The LCD will show [MENU]
<SET ?> flashing on the LCD screen.
the icon <SET ?> is flashing in the LCD
2) Press the button to go into the custom settings. Then continue pressing the button [ENTER] [MENU]
until the LCD display is shown as:
The number in the LCD shows the available memory.
When the available memory is displayed, press the button to access the interval time settings. [ENTER]
Continue to press the button to reach the desired interval time, then press the button to [MENU] [ENTER]
confirm the selection. The interval time can be set at 1, 5, 10, 15, and 30 seconds; 1, 2, 5, minutes or
DISABLE. 10 seconds is the default.
Note: Disabling the log function is also available in the interval time setting.
The positioning interval can also be set via the connecting camera.
Select <GPS device settings>
One the EOS-1D X and other models that display the following screen, set <GPS device> to <Enable>
and then select GPS device settings
.
,
Pro2-EOS