1.While the LCD shows press and the option menu
will flash.
2.Press or to change the option
3.1 If you prefer press while the LCD shows a flashing
and the LCD will show It means the calibration mode
is activated.
2.Perform the follow operation
Hold the receiver, and rotate it slowly around the X-axis, Y-axis, and
Z-axis, each axis done twice. Please do try to keep a constant speed of
rotation, and each rotation takes almost 10 seconds.
3.After doing the rotation in each axis, press to complete the
calibration.
Select your preferred direction data, the data is based on true north
or magnetic north.
How to do the custom setting?
Around X-axis
Around Y-axis
Around Z-axis
24
