Connect the GPS/BDS signal acquired receiver to a compatible camera.
Take photo as usual, the images will be geotagged as you shoot. The
images can also be tagged with the shooting direction.
1.Turn off the camera.
2.Inset the receiver’s mounting foot fully into the accessory shoe. Secure
the receiver.
3.Connect the receiver to the camera via the data cable. Plug one end
into the receiver’s terminal and secure the connection. Plug other end
into the camera’s Ten-pin remote terminal or Accessory terminal.
4.Turn on the camera, a stable GPS icon or other signal icon will be
displayed in the camera’s monitor or control panel.
5.Take photo and images is automatically geotagged.
The GPS/BDS data and heading viewed on the camera
The GMAX is connected to the Ten-pin terminal camera
Geotagging Image as you shoot
LATITUDE
LONGITUDE
ALTITUDE
TIME(UTC)
HEADING
:N
: 22 31.0786'
:E
:113 55.1056'
:79m
:2015/10/06
:08:30:25
:260.10
8
