10
LCD backlight
control
Backlight auto(default):
LCD backlight will be off when no LCD
button is pressed after 1min.
Backlight all on
11
Recover
manufactory
setting
Recover enable:
Return to manufactory default setting.
Recover disable(default)
3.2 LCD display setting:
The default LCD display is:
Line mode
Battery mode
BAT+PV mode
The LCD display content will be changed in turns by pressing button. The
selectable information is switched as below order: PV input voltage, PV input
current, AC input voltage, battery voltage, output voltage, output frequency, load
percentage, load VA value, load watt value. LCD will return to default LCD display
after 1 minute, or press
button return to default LCD display immediately.
3.3 Standby Charging Mode
The battery can be charged without switching on the inverter, and such operation
is called Standby Charging Mode. When AC input cable and battery is connected,
the inverter will enter into Standby Charging Mode and LCD will be turned on with
the following display. But if charger priority setting is only solar, utility won’t charge
battery.
