1 7
1 6
HIVOLTGUARD
The HiVoltguard is an over-
voltage protection device rated
at 5 Amps. The HiVoltguard will
disconnect if the mains go above
the upper limit and re-connect
automatically after the supply
returning and remaining below
the upper limit for the duration of
the wait time.
PLEASE READ CAREFULLY.
1. Make sure that your load does not exceed the rating of
the HiVoltguard which is 5 AMPS. If this is exceeded, the
HiVoltguard may be damaged, and the warranty will be
void.
2. Plug the HiVoltguard into the mains and plug your
appliance into the HiVoltguard.
3. Do not connect more than one appliance to the
HiVoltguard.
4. On first switching on, the yellow LED will indicate and
there will be no output while the HiVoltguard monitors the
mains. If the mains level is acceptable, the Yellow LED is lit
indicating that the Fridgeguard is in wait mode. At the end
of the wait time, and if the supply is below the upper limit,
the green LED goes on and the load is connected.
5. It is recommended that the HiVoltguard is kept switched
on, and the appliance switched on and off as required, to
prevent activating the time delay every time the appliance
is switched on.
SPECIFICATIONS
CONNECTION DIAGRAM
Please note: Some of these values (i.e. HVD and wait time) may be
different to adapt to local market conditions.
Maximum power
5 amps
Nominal voltage
230V
Over-voltage disconnect
265V
Spike protection
160J
Mains spike response time
<10ns
Mains spike discharge current
6.5kA
Wait Time
30 seconds
Ideal For
TV, Video, Hi-Fi, PABX, Fax
machines, and all electronic
equipment up to 5Amps
Socket availability
UK13, Schuko, 5A Indian
Weight 250gm
Dims
180x90x95mm
any electrical or
electronic appliance