Sollae SIG-5450, User Manual

Page: 26 / 33

SIG-5450 User Manual Ver. 1.1
- 25 -
https://www.ezTCP.com
5 Register Map
5.1 Read/Write
5.1.1 Digital Output Control Register
If the bit corresponding to each port of this register is set to 1, the status of
the output port is turned ON. Conversely, if the bit is set to 0, the status of the
output port is turned OFF. This register is only allowed to write when the port's
Pulse Mode is set to Disable.
Division Address
Bit
Count
Type Function Code
HMI Addressing
Example
Port 0 0 1 Boolean 01, 05 or 15 00001
Port 1 1 1 Boolean 01, 05 or 15 00002
Table 5-1 Digital Output Control Register
5.1.2 Digital Output Pulse Control Register
If the bit corresponding to each port of this register is set to 1, pulses are
output. When the pulse output ends, the corresponding bit is automatically set to 0.
This register is allowed to write only when the port’s Pulse Mode is set to Enable.
Division Address
Bit
Count
Type Function Code
HMI Addressing
Example
Port 0 80 1 Boolean 01, 05 or 15 00081
Port 1 81 1 Boolean 01, 05 or 15 00082
Table 5-2 Digital Output Pulse Control Register
5.1.3 Activating DO Status Change Notification Register
This register is for activating digital output status change notification. When
the value of the bit corresponding to the connected session ID is stored as 1, the
product sends a response frame through the session whenever the digital output port
status is changed. Therefore, by using this register, HMI can monitor the status of
the digital output port of the product without sending queries.
Division Address
Bit
Count
Type Function Code
HMI Addressing
Example
TCP0 session 1200 1 Boolean 05 01201
TCP1 session 1201 1 Boolean 05 01202
TCP2 session 1202 1 Boolean 05 01203
TCP3 session 1203 1 Boolean 05 01204
Table 5-3 Activating DO Status Change Notification Register