- 7 -
1.3.3.
Network Interface
The network interface of EZL-400S is composed with Ethernet and wireless LAN. If a
wireless LAN card is inserted to EZL-400S, EZL-400S interface is wireless LAN. If
there is no wireless LAN card on EZL-400S, EZL-400S interface is Ethernet.
The Ethernet interface has a function that senses whether the network is 10M bit or
100M bit Ethernet automatically. And it has a function that senses whether the cable is
cross-over cable or not.(auto MDI/MDIX)
Ethernet devices has there own unique hardware address. EZL-400S also has a hardware
address that is set in the factory. (The hardware address is called as MAC address)
EZL-400S requires a PCMCIA 16bit PC card for wireless LAN netowork. The card
should be compliant to PRISM. (If you would use a wireless LAN card which is not
provided from Sollae Systems, please test or contact me in advance.)
The MAC address of EZL-400S is in bottom of the body, not in PCMCIA card.
1.3.4.
LED Interface
Item
Name
Description
PWR
On when EZL-400S turns on
RUN
EZL-400S has IP address: blinks once a second
EZL-400S hasn’t IP address when dynamic IP: blinks 4 times
Console mode: blinks every 0.4 second with STS1 in the same time
WLAN On when linked to wireless LAN
LAN
On when linked to Ethernet
TX
Blinks when EZL-400S sends data to the network
NET
RX
Blinks when EZL-400S receives data from the network
1
On during TCP connection to COM1
Console mode: blinks every 0.4 second with RUN in the same time
2
On during TCP connection to COM2
3
On during TCP connection to COM3
STS
4
On during TCP connection to COM4
RX1
Blinks when EZL-400S receives data from COM1
TX1
Blinks when EZL-400S sends data to COM1
RX2
Blinks when EZL-400S receives data from COM2
Serial
TX2
Blinks when EZL-400S sends data to COM2