- 16 -
This item is for subnet mask of the network.
z
Gateway IP Address
This item is for the gateway’s IP address of the network.
z
Multi IP
If this item is set as [Yes], each COM ports can have their own IP addresses. The IP
addresses of each COM ports are configured in the [Local IP Address]. In this time, user
should set its IP addresses as same subnet mask.
z
IPv4 Type
User can select IP address types – static IP, DHCP, and PPPoE.
z
IPv6 Type
It is reserved.
z
EAPoL
It is for connecting a wireless LAN network that requires EAP authentication.
z
Password
Password is used for that user configures EZL-400S with ezcfgmp or logins via telnet
client. If EZL-400S is set with a password, user should input the password in this item to
configure the EZL-400S.
For changing the password, use [Change PWD].
z
ARP
Sets whether to or not to set IP address using ARP protocol. When this item is selected,
EZL-400S uses the destination IP address of the first packet coming to its MAC address
as its own IP address temporarily.
z
TELNET
Only when this item is enabled, you can log in Telnet, to control or monitor EZL-400S
through the console.
z
HTTP
It is reserved.