CSE-T16 User Manual Ver. 1.2
- 48 -
http://www.ezTCP.com
Sending serial break signal
You can send a break signal with a command “send brk” to serial port.
Type the command(“send brk”) using the escape shortcut keys (ctrl+
]
) after the TCP
connection via telnet client.
Figure 7-2 connecting telnet
Figure 7-3 sending break signal
7.1.2
Separator -
②
Using this function, you can control the length of network packets by specific characters.
When you enable this function, the maximum packet size is 1024 bytes.
Separator
options
Length
select the length between 0 ~ 4 bytes
Operation
Transmit Separators without additional bytes
Transmit Sepa 1 byte
Transmit Sepa 2 bytes
Table 7-1 separator
