CSE-T16 User Manual Ver. 1.2
- 14 -
http://www.ezTCP.com
2.1.1
Setting Network Area
This procedure should be followed to make CSE-T16 and your PC located on the same network
for a TCP connection.
IP address of PC setting
Add or change the IP address of the network adapter on your PC like following.
Click [Windows Control Panel] >> [Network Connections] and [Properties of the Network
Adapter]. Then, you can see the properties of [Internet Protocol (TCP/IP)]. Press the [Advanced]
button and add an IP Address like the figure below.
Figure 2-2 setting PC
CSE-T16 settings
ezManager comes with CSE-T16 as a configuration tool. This MS Windows-based software is
easy to use and does not need installation.
For simple test, we recommend that the variables keep default values as shown in the below
table.
Name
Default values
Network
Local IP Address
10.1.0.1
Subnet Mask
255.0.0.0
Serial Port
(COM1~16)
Baud Rate
19,200bps
Parity
NONE
