.31.
.30.
6. Operation
6.5.15 Power
Parameter
The
screen
shows
:
Figure 6.23 Power Rate Limit
YES=<ENT> NO=<ESC>
Power
para
:
1
.
000
Press the Down key to move the cursor
.
Press the Up key to change the digit
.
Please press the Enter to save the setting and press the ESC key to return
to the previous menu
.
This setting is used for grid operator, don't change setting under this manual.
This function is used for calibrate inverter output energy. It will not impact the energy count
for inverter with RGM.
7. Maintenance
8. Troubleshooting
The inverter is designed in accordance with the most important international grid-tied
standards and safety and electromagnetic compatibility requirements. Before delivering to
the customer, the inverter has been subjected to several tests to ensure its optimal operation
and reliability.
In case of failure, the LCD screen will display an alarm message. In this case, the inverter
may stop feeding into the grid. The failure descriptions and their corresponding alarm
messages are listed in Table 8.1:
Solis Single Phase 4G Inverter does not require any regular maintenance. However,cleaning
the dust on heat-sink will help the inverter to dissipate the heat and increase its life time.
The dust can be removed with a soft brush.
CAUTION:
Do not touch the inverter's surface when it is operating. Some parts of the inverter
may be hot and cause burns. Turn off the inverter (refer to Section 5.2) and wait for
a cool-down period before before any maintenance or cleaning operation.
The LCD and the LED status indicator lights can be cleaned with a damp cloth if they are too
dirty to be read.
NOTE:
Never use any solvents, abrasives or corrosive materials to clean the inverter.
7.Maintenance
