6. Operation
6. Operation
.57.
.58.
This function is used to select corresponding grid standards.
Please refer to the actual LCD setting for the grid standard options.
Figure 6.25 Select Standard
6.6.1 Select Standard
Settings
Select Standard
2015-02-23 19 35
Y E S
=
< E N T >
N O
=
< E S C >
G99
Select Standard:
Press "UP" and "DOWN" to go through the list.
Press "ENT" to check the parameters, press "ENT" again to select the standard.
For different countries and regions, corresponding grid code needs to be selected in the
inverter LCD to meet the requirements of local network provider.
This instruction indicates how to change the grid code and what code should be selected
in different places.
This following list illustrates the grid standard options in the inverter which are subject to
change. It is for your reference only. If customer has any doubts or uncertainty, please
consult Solis service department for confirmation.
Detailed protection limits can be viewed when choosing the code.
Please select "Save&Send" to enforce the code.
NOTE:
Please check if the grid code setting comply with local requirement.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Code in LCD
VDE4015
DK1
DK2
EN50438L
C10/11
NRS097
CEI-021
RD1699
EN50549
G98
G99
G98NI
G99NI
EN50549IE
ApplicableCountry/Region
Belgium
South Africa
Italy
Spain
Applicable in some European countries
UK
UK
North Ireland
North Ireland
Ireland
France
France
Applicable in some European countries
West Denmark
East Denmark
Germany
This function is used to start or stop the generation of the inverter.
Figure 6.26 Set ON/OFF
5.6.2 ON/OFF
Settings
ON
/
OFF
2015-02-23 19 35
ON
OFF
Y E S
=
< E N T >
N O
=
< E S C >
STOP
Table 6.1 Applicable
Country/Region
E S C
U P
D O W N
E N T
