SOLIS Palazzo Operating Instructions Download Page 5

9

Wipe with a soft, damp cloth

Rinse under running water

Casing

Container for coffee grounds and
drip tray

CLEANING

Rinse under running water

Remove the filter that is in the water tank and
rinse thoroughly. Replace by turning and pressing
lightly into place.

Clean weekly

Water tank

Coffee outlet

Use a mild non abrasive cleaning agent!

- The machine must not be connected to main switch for cleaning.
- Do not use conventional and / or microwave ovens for drying the coffee machine components.

2. Press button «Coffee powder»

(do not fill in coffee powder)

Brewing unit

Clean weekly.
Never clean the brewing unit
in the dishwasher!

1. Open service door.

Remove drip tray / grounds container

2.1 Loosen sieve with key...

2.2 ...and remove

2. Press PUSH-position and remove

brewing unit. If necessary, unscrew the
uppermost sieve in the brewing unit

Clean everything under running warm water
and let it dry. Clean service area

3. Reassemble brewing unit and

slide in, 

do NOT press the PUSH-

position!

4. Insert drip tray and grounds container,

then close service door

1. Place receptacle under coffee outlet

3. Let flow pure water through the system

to avoid residuals in the pipes etc.

The documentation for your new coffee machine consists of these instructions and the
separately enclosed safety advice. This documentation should be read before the installation
of the device. Keep the documentation handy at any time and pass it on to any other
user.

Operating Instruction

Summary of Contents for Palazzo






Reviews: