67
E
Trouble shooting guide
Problem
POSSIBLE CAUSES
What to do
Coffee does
Machine is not turned on or plugged in
Ensure the machine is plugged in and the ‘on/off’ button is in the
not run through
‘on’ position.
Water tank is empty
Refer to step 1 – Filling the water tank on page 56.
Coffee grind is too fine
Ensure you use a suitable espresso grind. Refer to ‘The Grind’ on
page 62-63.
Too much coffee in the filter
Refer to ‘Preparing the coffee’ on page 57.
Coffee tamped too firmly
Refer to ‘Tamping the coffee’ on page 57.
The filter is blocked
Use the fine pin on the cleaning tool to clear the holes.
Please refer to ‘Cleaning the filters’ on page 64.
Coffee runs out
quickly
The coffee grind is too coarse
Ensure you use a suitable espresso grind. Refer to ‘The Grind’ on
page 62-63.
Not enough coffee in the filter
Refer to ‘Preparing the coffee’ on page 57.
Coffee not tamped firmly enough
Refer to ‘Preparing the coffee’ on page 57.
Coffee runs out around
Filter holder is not inserted in the brew head properly
Refer to ‘Inserting the filter holder’ on page 58.
the edge of the filter holde
There are coffee grounds around the filter rim
Clean any excess coffee from the rim of the filter holder to ensure
a proper fit into the brew head.
Too much coffee in the filter
Refer to ‘Preparing the coffee’ on page 57.
Coffee has been tamped too firmly
Refer to ‘Tamping the coffee’ on page 57.
Incorrect filter for amount of coffee used
Ensure you use the small filter for 1 cup of coffee and the large
filter for 2 cups of coffee.
Anleitung_Espresso_Master_2.indd 67
2.12.2009 16:07:01 Uhr
