IMPORTANT:
Never operate the
appliance without water. For reasons
of hygiene, we would recommend you
to vent and rinse out the appliance
before it is used for the first time or
after any long period of non-use (e.g.
after the holidays).
4.0 Making coffee with ground
coffee
It is assumed that the appliance has
been started up in accordance with
Point 3 and is ready to operate, i.e.
the container has been filled with
water and the temperature light is
showing green.
4.1 When the appliance is ready, fit
the appropriate filter (one-cup or
two-cup) into the filter holder.
Depending on the filter size, fill with
one or two level measuring spoons of
coffee and press down lightly with the
built-in tamper . Wipe the edge of the
filter holder to remove any coffee
grains.
4.2 Insert the filter holder into the
brewing unit by moving from left
to right
and close tightly. Check that
the filter holder is fully tightened.
4.3 Place one or two cups on the
tray under the filter holder.
Note:
The height of the tray can be
adjusted to take small espresso cups
simply by turning it round.
4.4 To start pouring, briefly press
the coffee switch or
Note:
The SOLIS CREMA model SL 90
is fitted with an automatic pre-brew
device. The coffee is first moistened
and then pouring is stopped briefly.
The real brewing process begins only
from this point.
SOLIS CREMA SL 90
User’s manual
51
