73
72
s
ASSEMBLY
•
Take all parts out of the packaging and discard the packaging material, especially
the plastic bags (suffocation hazard for children!) and potential advertisement
stickers and labels (except for the type plate).
•
Place all parts that need to be assembled in front of you. At this time, do not
unpack the safety grid.
A. MOUNTING THE PILLAR TO
THE PEDESTAL
1.
Unscrew the screw cap on the
threaded end of the pillar (turn it
towards “Loosen”, in a counter
clockwise direction). You will later
need the screw cap to fasten the pil-
lar to the pedestal.
2.
Turn the pedestal upside down and
remove the cable storage cover. A
cable (
B
) is visible underneath.
3.
Push the connection piece of the pil-
lar into the hole in the pedestal. The
other cable (
A
), which incorporates
the connection piece of the pillar, has
to be fed through the little sideways
opening in the hole in the pedestal.
Make sure not to pinch the cable.
4.
Now, push the connection piece of
the pillar all the way into the hole in
the pedestal so that the threads in
the bottom of the pedestal become
visible.
5.
Screw the screw cap onto the
threaded end of the pillar (turn
towards “Tighten” in a clockwise
direction). Now, the pillar is installed.
6.
Now, the two cables with the two
connection pieces lie next to each
other. Connect the two connection
pieces.
7.
Close the cable storage compartment
with the cover.
B
A
GB
GB
