Solimar Air Knocker Series, Instruction Manual, Page: 6 / 13

11 10
＜
Attach to flat surface
＞ ＜
Attach to curved surface
＞
Long reinforcing ribs
Base assembly
Reinforcing plate
(Not required for KNR 20 / 20-SS)
Hopper
Perpendicular line of the hopper
Attaching surface
Attaching surface
3. WELDING THE BASE ASSEMBLY AND REINFORCING RIB:
• Cut the reinforcing rib to match the configuration of the part to which it is to be mounted.
• Orient the holes in the base so that exhaust port of Knocker faces downward.
• Use all-around welding to weld the base assembly and make sure that the bolt holes on the right and
left sides are symmetrical.
KNR-DI Models KNR Models
KNR Model: Install Reinforcing Rib
Install to Plane Surface Install to Curved Surface
Reinforcing rib
Cut as adjust curved surface
Base assembly
Reinforcing rib
Reinforcing
palate
Base assembly
Reinforcing rib
Reinforcing
palate
Base assembly
Reinforcing rib
Reinforcing
palate
Base assembly
Reinforcing rib
Reinforcing
palate
ORIENTATION BASE ASSEMBLY
Please make sure that the holes in the vessel and the base are
correct so that the exhaust port of the Knocker faces downward.
KNR 20
KNR 30 /40 /60 /80