Press the "
" button to confirm the setting, the month display will start flashing. Now use the "
" and "
"
buttons to set the correct month.
Press the button"
" to confirm the setting, the date display will start flashing. Now use the "
" and "
"
buttons to set the correct date.
Press the "
" button to confirm the setting, the language selection for the day name display will start flashing.
Now use the "
" and "
" buttons to select the language.
German, GE; English, EN; French, FR; Italian, IT; Spanish, SP; Dutch, DU; Danish, DA
Press the "
" button to confirm the setting, the temperature grades will be displayed and start flashing. Now
use the "
" and "
"
buttons to set the temperature unit in °C or °F.
Press the "
"
button to confirm the setting, the barometric pressure in mb/hPa is displayed and starts flashing.
Now use the "
" and "
" buttons to set the pressure unit in mb/hPa or inHg or mmHg.
Press the "
" button to confirm the settings and exit the setup procedures and enter clock mode.
After 20 seconds without pressing any button, the clock automatically switches from setup mode to normal time
mode.
Display of temperature/humidity/barometric pressure and temperature/humidity trend
The LCD display shows the current indoor temperature/humidity/barometric pressure and the
temperature/humidity trend (indoors). Once successfully connected to an outdoor sensor, the weather station can
display outdoor temperature/humidity and trend temperature/humidity (outdoor).
The following information may be displayed:
Air temperature/humidity is rising.
Temperature/humidity remains constant.
Temperature/humidity is dropping.
Maximum/minimum temperature/relative humidity
To toggle the indoor/outdoor maximum and minimum temperature and humidity readings, press the "
MEM"
button:
1x press - displays the maximum temperature and humidity values.
2x press - displays the minimum temperature and humidity values.
3x press - return to the current temperature and humidity values.
To reset the maximum and minimum temperature and humidity, press and hold the "
MEM
" button for about 2
seconds. This will reset all recorded minimum and maximum readings. If the measured temperature is below the
ranges,
LL.L
will be displayed. If the measured temperature is above the ranges,
HH.H
will be displayed
.
If the battery symbol "
" appears, the batteries in the outdoor sensor must be replaced as soon as possible.
Frost
If the outside temperature is between -
1°C and +3°C or +30°F
and
+37°F, the display
will show " ".
Weather forecast
The weather station calculates the weather forecast for approximately 12 hours based on the barometric pressure.
This forecast cannot, of course, be compared with the forecasts of professional meteorological services supported by
satellites and high-performance computers, but only provides an approximate indication of current developments.
Please consider the weather forecast from the local weather service and also the forecast from your weather service
weather stations. If the information from your device and the local weather service differs, please take it as
the guiding advice of this professional service.
Summary of Contents for TE81WiFi
Page 2: ...Description...
