The automatic reception takes place daily, at: 1:00, 2:00 and 3:00. If errors occur, signal reception is attempted again at 4:00 and 5:00. If the signal is
successfully received at 4:00, for the given day, reception is not repeated. If signal reception at 4:00 is unsuccessful, another attempt is made at 5:00 and
regardless of whether it is successful or not, no other attempt is made that day. The control signal reception process lasts 7 minutes.
In the RCC reception mode an icon is blinking.
If the signal is weak or if the device is not able of isolating the correct signal, the tower symbol starts blinking, but the radio wave symbol is not displayed.
If the control signal has been received successfully, the full RCC reception icon is displayed and the device leaves the reception mode.
If you want to exit the reception mode, briefly press the button.
Unless a control signal is received within three days, the last reception attempt is made at 1:00 the next day.
If, in the RCC signal reception mode, the alarm is set off, the device leaves the reception mode and enters the alarm mode.
After reception of the DST signal, the a DST icon is displayed.
After a reset, the RCC and DST symbols disappear.
3.8
Weather Forecast Function
The weather station generates weather forecasts for the next 12 hours. The measurement is based on monitoring the development of atmospheric pressure. The
forecast information is only of an indicative value. This weather station is not comparable to professional equipment or to satellite and computing technology. To
get objective weather forecasts, consult official sources.
Six-level graphic weather forecast:
sunny
scattered
clouds
cloudy
rainy
heavy rain
snow
Note:
The forecast can be accurate under conditions of natural ventilation; errors occur when the device is placed in a room or an air-conditioned environment.
Three temperature and humidity development levels:
Temperature/humidity has an raising trend
Temperature/humidity stays at a constant value
Temperature/humidity has an decreasing trend
3.9
Lighting up the Display
When the weather station is powered by batteries, pressing the touch sensor /ZZ lights the display for 15 seconds. If the display backlight is too weak,
replace the batteries. When powered by the adapter, the display is lit continuously.
3.10
Moon Phases
Depending on the correct setting of the current year, month and day, the phases of the Moon, as it is lit by the Sun, are displayed. Moon phases are displayed in
six increments.
3.11
Perceived Comfort Function
Comfortable
too hot or too cold
The perceived comfort function depends on the measurement of temperature, pressure and humidity. Based on these measurements, the station determines
the expected perception of the interior environment by selecting one of five options (see picture).
Press and hold the “
” button for 2 seconds to enter the air pressure unit and weather settings, the pressure units will be flashing display, Use the “
▲
” and
“
▼
” button to set the pressure unit to display in the "hPa/mb" or "inHg".
Press the “
” key to confirm the settings and switch to the weather, the weather graphics will be flashing display, Use the “
▲
” and “
▼
” button to set the
current weather conditions, so that the weather forecast is more accurate.
A CE Declaration of Conformity is issued to the product in accordance with applicable regulations. On request from the manufacturer: [email protected], or to
download at https://www.solight.cz/documents/te81_prohlášení o shodě.pdf
The maximum radiated power of the device in the working frequency band 433.92MHz is 10mW (+ 10dbm).
Producer: Solight Holding, s.r.o., Na Brně 1972, Hradec Kralove 500 06, Czech Republic.
