Disassembly guide and optional’s
ENGLISH
Contents
5.
Faders replacing
6.
Swap 8-IN and DANTE AES67 modules (option A-67)
7.
Remove the touch-screen module
8.
Remove the USB module
1. Faders replacing
In all models the faders are connectorized and mounted to the chassis with screws. Its replacement
with original spare parts is simple. The faders are accessed from two covers located at the base of the
console.
1.
Remove the knob from the fader you want to replace. Pull up to remove it.
2.
Remove the two
Phllips
screws that fix the fader.
3.
To support the unit with its base upwards, use expanded polyurethane or a similar material as
support under the sides, with a height of 5 cm or more; to prevent them from resting on the
screen and knobs, as the pressure could damage them.
Figure 3: Support blocks under the sides
9/15
Figure 1 - Pull up to remove the knob
Figure 2: Remove the screws
