Disassembly guide and optional’s
ENGLISH
Figure 7: Removing the bottom base
3.
Remove from rear panel the fixing screws indicated on next illustration.
Figure 8: Tornillos de sujeción de la placa
4.
Identify and lift the 8IN or A67 board (depending on the case) by disconnecting the flat cable
from the central board.
Figure 9: 8-IN / A67 board location
5.
The 8IN and A67 modules are supplied with a flat cable mounted with a safety lock. It is not
necessary to disconnect this side of the cable. Assemble the new board by placing the screws
indicated in
step 3
.
Figure 10: INPUT board layout
6.
Connect the flat ribbon cable indicated in
step 4
. Make sure the connector lock is fixed.
11/15